Fire Fighting Tools

Call for Quote-Minimum Order 4 6.0 lbs. Flathead fireman’s style single bit axe with a 32 in. curved handle. Dayton patterned head. Used in all manner of municipal fire fighting applications, chopping, battering, door stop, ect. Cutting edge is approximately 5″ in. overall length and the poll is square. Forged tool steel head. Made in USA. Body fully polished, hand sharpened, tapered bit for cutting. ANSI Standards call for bit hardness of Rc 45-60, at least ½ inch back from the cutting edge. Council Tool internal standards call for tempered bit hardness of Rc 48-55 and we target 1-1/4 inches from the cutting edge. The poll and eye walls are not hardened and remain in the as forged condition. Body coated with fire engine red enamel and the cutting edges in clear lacquer to deter rust. 32 in. curved hickory handle. Eye section is dried to below 10% moisture content to minimize shrinkage and help prevent loosening. Axe head is hydraulically seated onto handle and secured with a serrated aluminum wedge. The serrated shape improves bite and the aluminum choice of material is strong, lightweight and does not change size with moisture content. The interior detail of the eye is tapered and allows for a strong mechanical bond. Approximately 1/2 in. of the overall length of the handle is removed during assembly. Prop 65 Warning: This product contains Nickel (metallic), a chemical known to the State of California to cause cancer. For more information, go to www.p65warnings.ca.gov. We Are Proud To Offer Top-Quality Firefighting Tools Nationwide

Read more less

Call for Quote-Minimum Order 4 6.0 lbs. Flathead fireman’s style single-bit axe with a 36 in. curved handle. Perfect for the firefighter on your list. Dayton patterned head. Used in all municipal fire fighting applications, chopping, battering, door stop, ect. The cutting edge is approximately 5″ in. overall length and the poll is square. Forged tool steel head. Made in the USA. Body fully polished, hand sharpened, tapered bit for cutting. ANSI Standards call for bit hardness of Rc 45-60, at least ½ inch back from the cutting edge. Council Tool internal standards call for tempered bit hardness of Rc 48-55 and we target 1-1/4 inches from the cutting edge. The poll and eye walls are not hardened and remain in the as forged condition. The body is coated with fire engine red enamel and the cutting edges in clear lacquer to deter rust. 36 in. curved hickory handle. Eye section is dried to below 10% moisture content to minimize shrinkage and help prevent loosening. The axe head is hydraulically seated onto handle and secured with a serrated aluminum wedge. The serrated shape improves bite and the aluminum choice of material is strong, lightweight and does not change size with moisture content. The interior detail of the eye is tapered and allows for a strong mechanical bond. Approximately 1/2 in. of the handle's overall length is removed during assembly. Prop 65 Warning: This product contains Nickel (metallic), a chemical known to the State of California to cause cancer. For more information, go to www.p65warnings.ca.gov. We Are Proud To Offer Top-Quality Firefighting Tools Nationwide

Read more less

Call for Quote-Minimum Order 4 6.0 lbs. Flathead fireman’s style single bit axe with a 36 in. fiberglass handle. Dayton patterned head. Used in all manner of municipal fire fighting applications, chopping, battering, forcible entry, door stop, ect. Cutting edge is approximately 5″ in. overall length and the poll is square. Forged tool steel head. Made in USA. Body fully polished, hand sharpened, tapered bit for cutting Heat-treated cutting edge produces fine grain structure and RC 45-55 (Rockwell Hardness Value) for safety, edge holding and toughness. The body is coated with fire engine red enamel and the cutting edge in clear lacquer to deter rust. 36 in yellow clad style fiberglass handle. Traditional single bit shape. Construction is a pultruded structural fiberglass core with an injection molded jacket acting as an exterior body. The jacket is tough, durable engineered polymer. Extremely strong, non-conductive and non-corrosive. Axe head is joined to the handle with a strong resilient epoxy, forming a chemical and mechanical bond. The interior detail of the eye is tapered and allows for a strong mechanical bond. Prop 65 Warning: This product contains Nickel (metallic), a chemical known to the State of California to cause cancer. For more information, go to www.p65warnings.ca.gov. We Are Proud To Offer Top-Quality Firefighting Tools Nationwide

Read more less

Call for Quote-Minimum Order 4 6.0 lbs. Pickhead fireman’s axe with a 32 in. curved hickory handle. Traditional pick head style. Cutting bit on one end and a pick designed to penetrate on the other. Used in all municipal fire fighting applications, chopping, battering, forcible entry, door stop, ect. The cutting edge is approximately 5″ in. overall length. Forged tool steel head. Made in the USA. Body fully polished, hand sharpened, tapered cutting edge and pick. ANSI Standards call for a bit hardness of Rc 45-60, at least ½ inches back from the cutting edge. Council Tool internal standards call for tempered bit hardness of Rc 48-55, and we target 1-1/4 inches from the cutting edge. The poll and eye walls are not hardened and remain in the as-forged condition. The body is coated with fire engine red enamel and the cutting edges in clear lacquer to deter rust. 32 in American hickory handle. The eye section is dried to below 10% moisture content to minimize shrinkage and help prevent loosening. The axe head is hydraulically seated onto the handle and secured with a serrated aluminum wedge. The serrated shape improves bite and the aluminum choice of material is strong, lightweight and does not change size with moisture content. The interior detail of the eye is tapered and allows for a strong mechanical bond. Approximately 1/2 in. of the handle's overall length is removed during assembly. Prop 65 Warning: This product contains Nickel (metallic), a chemical known to the State of California to cause cancer. For more information, go to www.p65warnings.ca.gov. We Are Proud To Offer Top-Quality Firefighting Tools Nationwide

Read more less

Call for Quote-Minimum Order 4 6.0 lbs. Pickhead fireman’s axe with a 36 in. curved hickory handle. Perfect for the Traditional pick head style. Cutting bit on one end and a pick designed to penetrate on the other. Used in all municipal fire fighting applications, chopping, battering, forcible entry, door stop, ect. The cutting edge is approximately 5″ in. overall length. Forged tool steel head. Made in the USA. Body fully polished, hand sharpened, tapered cutting edge and pick. ANSI Standards call for a bit hardness of Rc 45-60, at least ½ inch back from the cutting edge. Council Tool internal standards call for tempered bit hardness of Rc 48-55 and we target 1-1/4 inches from the cutting edge. The poll and eye walls are not hardened and remain in the as forged condition. The body is coated with fire engine red enamel and the cutting edges in clear lacquer to deter rust. 36 in American hickory handle. The eye section is dried to below 10% moisture content to minimize shrinkage and help prevent loosening. The axe head is hydraulically seated onto the handle and secured with a serrated aluminum wedge. The serrated shape improves bite and the aluminum choice of material is strong, lightweight and does not change size with moisture content. The interior detail of the eye is tapered and allows for a strong mechanical bond. Approximately 1/2 in. of the handle's overall length is removed during assembly. AOL is nominal. This product meets or exceeds ASME B107.400-2008. Prop 65 Warning: This product contains Nickel (metallic), a chemical known to the State of California to cause cancer. For more information, go to www.p65warnings.ca.gov. We Are Proud To Offer Top-Quality Firefighting Tools Nationwide

Read more less

Call for Quote-Minimum Order 4 6.0 lbs. Pickhead fireman’s axe with a 34 1/2 in. fiberglass handle. Traditional pick head style. Cutting bit on one end and a pick designed to penetrate on the other. Used in all municipal fire fighting applications, chopping, battering, forcible entry, door stop, ect. The cutting edge is approximately 5″ in. overall length. Forged tool steel head. Made in the USA. Body fully polished, hand sharpened, tapered cutting edge and pick. ANSI Standards call for a bit hardness of Rc 45-60, at least ½ inch back from the cutting edge. Council Tool internal standards call for tempered bit hardness of Rc 48-55 and we target 1-1/4 inches from the cutting edge. The poll and eye walls are not hardened and remain in the as forged condition. The body is coated with fire engine red enamel and the cutting edges in clear lacquer to deter rust. 34 1/2 in. yellow clad style fiberglass handle. Traditional single-bit shape. Construction is a pultruded structural fiberglass core with an injection molded jacket acting as an exterior body. The jacket is a tough, durable, engineered polymer. Extremely strong, non-conductive and non-corrosive. The axe head is joined to the handle with a strong, resilient epoxy, forming a chemical and mechanical bond. The interior detail of the eye is tapered and allows for a strong mechanical bond. Prop 65 Warning: This product contains Nickel (metallic), a chemical known to the State of California to cause cancer. For more information, go to www.p65warnings.ca.gov. We Are Proud To Offer Top-Quality Firefighting Tools Nationwide

Read more less

Call for Quote-Minimum Order 6 3.75 lbs. Pulaski axe with 36 in. hickory handle. Thought to have been developed in the early 1900s by Edward Pulaski, a legendary Forest Service Ranger in Idaho. It is said that in August 1910, his presence saved the lives of 45 men during a difficult time in a large fire. A traditional style bit axe blade on one end and a mattock blade for digging or grubbing on the other end. Used in a variety of settings, including forestry and general landscaping. Forged from 1060 steel. Made in the USA. Hand-sharpened, single-bit edge and mattock blade. ANSI Standards call for a bit hardness of Rc 45-60, at least ½ inch back from the cutting edge. Council Tool internal standards call for tempered bit hardness of Rc 48-55. The body is coated with red enamel and the cutting edges in clear lacquer to deter rust. 36 in. double-bit American hickory handle. The eye section is dried to below 10% moisture content to minimize shrinkage and help prevent loosening. The axe head is hydraulically seated onto the handle and secured with a serrated aluminum wedge. The serrated shape improves bite and the aluminum choice of material is strong, lightweight and does not change size with moisture content. The interior detail of the eye is tapered and allows for a strong mechanical bond. Approximately 1/2 in. of the handle's overall length is removed during assembly. OAL is nominal. Prop 65 Warning: This product contains Nickel (metallic), a chemical known to the State of California to cause cancer. For more information, go to www.p65warnings.ca.gov. We Are Proud To Offer Top-Quality Firefighting Tools Nationwide

Read more less

Call for Quote-Minimum Order 6 3.75 lbs. Pulaski axe with 36 in. hickory handle. It is thought to have been developed in the early 1900s by Edward Pulaski, a legendary Forest Service Ranger in Idaho. It is said that in August 1910, his presence saved the lives of 45 men during a difficult time in a large fire. A traditional style bit axe blade is on one end, and a mattock blade is used for digging or grubbing on the other end. Used in a variety of settings, including forestry and general landscaping. This version is made to the USFS specification using sharpening gauges on the axe and mattock ends, and the handle meets all required dimensional specs. Forged from 1080 steel. Made in the USA. Hand-sharpened, single-bit edge and mattock blade. ANSI Standards call for a bit hardness of Rc 45-60, at least ½ inch back from the cutting edge. Council Tool internal standards call for tempered bit hardness of Rc 53-58. Body coated with black enamel matching required paint chip and the cutting edges in clear lacquer to deter rust. 36 in. Top-grade double-bit American hickory handle. The eye section is dried to below 10% moisture content to minimize shrinkage and help prevent loosening. The axe head is hydraulically seated onto the handle and secured with a serrated PVC wedge. The serrated shape improves bite and the PVC choice of material is strong, lightweight and does not change size with moisture content. The interior detail of the eye is tapered, allowing for a strong mechanical bond. Approximately 1/2 in. of the handle's overall length is removed during assembly. OAL is nominal. They are produced in accordance with US Forest Service specification 5100-355E. This product meets the GSA spec for NSN# 5120-00-293-3467. Prop 65 Warning: This product contains Nickel (metallic), a chemical known to the State of California to cause cancer. For more information, go to www.p65warnings.ca.gov. We Are Proud To Offer Top-Quality Firefighting Tools Nationwide

Read more less

Call for Quote-Minimum Order 6 3.75 lbs. Pulaski axe with 42 in. fiberglass handle.  It is thought to have been developed in the early 1900s by Edward Pulaski, a legendary Forest Service Ranger in Idaho. It is said that in August 1910, his presence saved the lives of 45 men during a difficult time in a large fire. A traditional style bit axe blade is on one end, and a mattock blade is used for digging or grubbing on the other end. Used in a variety of settings, including forestry and general landscaping. The new version features a longer 42-inch fiberglass handle. Forged steel head. Made in the USA. Hand-sharpened, single-bit edge and mattock blade. ANSI Standards call for a bit hardness of Rc 45-60, at least ½ inch back from the cutting edge. Council Tool internal standards call for tempered bit hardness of Rc 53-58. The body is coated with black enamel, and the cutting edges are in clear lacquer to deter rust. 42 in. Top-grade double-bit American fiberglass handle. The handle is secured with epoxy to prevent loosening. The interior detail of the eye is tapered, allowing for a strong mechanical bond. Approximately 1/2 in. of the handle's overall length is removed during assembly. OAL is nominal. They are produced following US Forest Service specification 5100-355E. This product meets the GSA spec for NSN# 5120-01-679-2683 Prop 65 Warning: This product contains Nickel (metallic), a chemical known to the State of California to cause cancer. For more information, go to www.p65warnings.ca.gov. We Are Proud To Offer Top-Quality Firefighting Tools Nationwide

Read more less

  Call for Quote-Minimum Order 6 McLeod tool with a 48 in. handle. Produced in accordance with USDA Forest Service Specification 5100-353D, dated November 1992, or latest version thereof. Combination of a rake and a hoe used primarily for clearing brush and other surface debris and for digging in the soil to construct fire control lines on wildfires and controlled burns.  Made in USA. High carbon steel blade, formed and sharpened for digging and clawing. Heat Treated for toughness and wear resistance. Black enamel finish for rust resistance. Enhanced ferrule joint for strength and durability. 48 in american ash handle is strong and durable. Shipped knocked down, assembles in minutes. Prop 65 Warning: This product contains Nickel (metallic), a chemical known to the State of California to cause cancer. For more information, go to www.p65warnings.ca.gov. We Are Proud To Offer Top-Quality Firefighting Tools Nationwide

Read more less

  Call for Quote-Minimum Order 4 Forest fire shovel is forged from a single piece of high-carbon steel—a solid shank with forward-turned steps for ease of use. Heat-treated and tempered for toughness and durability.  The study ash handle is driven into the socket and riveted. The shovel meets USFS specifications.  Made in the USA. Prop 65 Warning: This product contains Nickel (metallic), a chemical known to the State of California to cause cancer. For more information, go to www.p65warnings.ca.gov. We Are Proud To Offer Top-Quality Firefighting Tools Nationwide

Read more less

Call for Quote-Minimum Order 6 Fire swatter has a 60 in. handle. Sometimes referred to as a fire flap, flail or beater, this tool is used to smother a fire. Typically it is used to control or direct flames during controlled burns or in conjunction with mop-up details after fires. Production of this item dates back to the 1920s. Older specifications may specify the flap as containing cotton ply’s. This type of material is no longer available. Made in the USA. The flap is a masticated rubber piece of approximately 1/4′ in. diameter x 12 in. x 15 in. Secured to a rectangular steel structure member with a welded stud forced into a ferrule. Red enamel finishes on the metal frame. 60-inch American ash handle with a ferrule for strength and durability. Bundled for shipment and handling. Prop 65 Warning: This product contains Carbon Black, a chemical known to the State of California to cause cancer. For more information, go to www.p65warnings.ca.gov. We Are Proud To Offer Top-Quality Firefighting Tools Nationwide

Read more less