Helmet Lights

  FORTEM® - IS A HELMET-MOUNTED DUAL-LIGHT™ FLASHLIGHT The FORTEM® Intrinsically Safe Dual-Light™ flashlight is the most versatile choice for helmet-mounted hands-free lighting. The powerful light has a 250-lumen flashlight to cut through dense smoke and an independent 115-lumen, 45-degree downward-angle, floodlight.  User-adjustable flashlight modes range from 250 lumens on high, 100 lumens on medium, and 25 lumens on low. Use the floodlight to light up your gear or feet as you walk by adjusting from 115 lumens on high, to 50 lumens on medium. The potentially life-saving 10 lumens Survival Mode. The Dual-Light™ mode (both the flashlight and the floodlight turned on at the same time) has 150 lumens to provide maximum safety. Light has a green, rear-facing LED light so that others can easily see in low visibility situations. Fits on virtually all fire helmets (or side-brim hard hat) regardless of whether it has an up-turned or down-turned brim thanks to the 360-degree pivoting mount that allows precise positioning. Rated IP-67 dustproof/waterproof. Meets the requirement for NFPA-1971-8.6 (2013). Powered by 2 CR123 batteries (included). Not compatible with rechargeable batteries. Features: Flashlight – Floodlight – Dual-Light™ LED technology User-selectable brightness on flashlight & floodlight including 10 Lumen survival mode on floodlight 45 degree downward angled floodlight Works with virtually all fire helmets and hard hats Can be mounted to the brim on either side of most helmets Allows user to select exact angle and position for optimum light alignment and clearance of face shields, goggles or other equipment Rear-facing Green safety LED IP-67 Dustproof / Waterproof Impact and chemical resistant Meets the requirements for NFPA-1971-8.6 (2013) Serialized for personal identification 2 CR123 batteries (included) Limited Lifetime Warranty Specifications: UPC: 017398805940 Multi-Function: Yes High Lumens: 250 Medium Lumens: 100 Low Lumens: 25 Floodlight Lumens: 115 Flood Medium Lumens: 50 Flood Low Lumens: 10 High DL Lumens: 150 High Beam Distance (m): 203 Medium Beam Distance (m): 126 Low Beam Distance (m): 64 High Candela: 10,335 Medium Candela: 3,975 Low Candela: 1,021 Drop Rating: 2 m Water Rating: IP-67 Dustproof/Waterproof High Runtime (h): 3.5 Medium Runtime (h): 6.5 Low Runtime (h): 16 High Flood Runtime (h): 3.5 Medium Flood Runtime (h): 6.5 Low Flood Runtime (h): 16 High Dual-Light Runtime (h): 3.5 Strobe: Yes Floodlight Color: White Switch Function: Dual Switches - Flashlight H/M/L/Strobe, Floodlight - H/M/Survival Light Source: LED Serialized: Y Case Material: 6061-T6 Aluminum Body Color: Red Strap/Mount: Helmet Mount Quantity of Batteries: 2 Power Source: CR123 Package Contents: Light, 2 sets of brim mounting screws, Allen wrench, 2 CR123 batteries US Patent(s) : 9713217 Warranty: Limited Lifetime Warranty Dimensions: Length: 3.2 in (81 mm) Width: 1.4 in (36 mm) Weight: 6.5 oz (184 g) Head Diameter: 1.1 in (29 mm) Certifications: CLASS I DIV 1:GRPS A-D T4 CLASS II & III DIV 1:GRPS E-G T135°C CLASS I ZONE 0:AEx ia IIC T4 GaEx ia IIC T4 We Are Proud To Offer Top-QualityFirefighting Tools and Firefighter Gear

Read more less

FORGE™ IS A HELMET-MOUNTED MULTI-FUNCTION FLASHLIGHT The Intrinsically Safe helmet-mounted multi-function flashlight is the most versatile choice for helmet-mounted hands-free lighting. This light outshines the competition with its powerful 360-lumen tightly focused flashlight and a beam distance rating of 218 meters (715 feet). Choose a lower 180-lumen setting for increased runtime or the 30-lumen Survival Mode for 30 hours.It fits on any fire helmet (or side-brim hard hat) regardless of whether it has an up-turned or down-turned brim, thanks to the multi-angle mount that allows exact positioning. This feature makes it possible to not only avoid goggles, face shields, and other helmet-worn gear but also place the light exactly where it’s needed. The 5465 is IP-X7-rated waterproof and meets the requirement for NFPA-1971-8.6 (2013). Powered by 2 CR123 batteries (included). Not compatible with rechargeable batteries. Features: User-selectable 360-lumen High, 180-lumen Low and 25-lumen Survival modes A single push-button switch operates easily with heavy gloves The switch features built-in rear-facing green safety LED A 360-degree multi-angle mount allows the user to select the exact angle and position for optimum light alignment and clearance of face shields, goggles or other equipment  Helmet clamp with rubber foot provides secure, mar-free attachment Works with virtually all fire helmets and hard hats Impact & chemical resistant IP-X7 Waterproof cETLus certified Class I Div 2 Intrinsically Safe Meets the requirements for NFPA-1971-8.6 (2013) Serialized for personal identification 2 CR123 batteries (included) Limited Lifetime Warranty Specifications: UPC: 017398807135 Multi-Function: Yes High Lumens: 360 Medium Lumens: 180 Low Lumens: 25 High Beam Distance (m): 218 Medium Beam Distance (m): 161 Low Beam Distance (m): 43 High Candela: 11,928 Medium Candela: 6,544 Low Candela: 472 Drop Rating: 2 m Water Rating: IP-X7 Waterproof High Runtime (h): 4.5 Medium Runtime (h): 6.5 Low Runtime (h): 30 Switch Function: Single Switch - High, Low and Survival Brightness Light Source: LED Case Material: 6061-T6 Aluminum Body Color: Red Strap/Mount: Helmet Mount Quantity of Batteries: 2 Power Source: CR123 Package Contents: Light, 2 CR123 Lithium batteries, Allen key US Patent(s) : 9713217 Warranty: Limited Lifetime Warranty Dimensions: Length: 3.2 in (81 mm) Depth: 3.2 in (81 mm) Weight: 7.2 oz (204 g) Diameter: 1.1 in (28 mm) Certifications: CLASS I DIV 2:GRPS A-D T3 CLASS II & III DIV 2:GRPS F-G T135°C CLASS I ZONE 2:GROUP IIC T3 We Are Proud To Offer Top-QualityFirefighting Tools and Firefighter Gear

Read more less

The New Fire Cam BlackJack Flashlight BJ1000 Kit is a MUST-HAVE if you are an interior firefighter. The BJ1000 multi-function fire helmet flashlight provides an optimal HIGH POWER WHITE LED ADJUSTABLE beam for firefighting in dark smoke-filled environments. The powerful 1000 Lumen light has been tested and approve by firefighting professionals.  The rugged design with a drop resistance rating of up to 4 feet will withstand the rigorous firefighting environments. The BJ1000 Flashlight Highlights: Four different modes: High beam, Medium beam, Low beam, Strobe. Adjustable spot to flood light beam Military grade aluminum Water/Solids Resistant IP-65 Rated Powered by one rechargeable protected battery (included) USB C sealed charging port The BJ1000 was designed by fighter fighters and will outperform other flashlights in firefighting conditions on the market. Warranty Fire Cam BlackJack BJ1000 fireman flashlight Includes 1 Year Warranty In the box Blackjack BJ1000 Flashlight x 1 Blackjack ACE Mount or Global Mount (GM005) x 1 Blackjack Helmet Flashlight Battery x 1 Charging cable x 1 We Are Proud To Offer Top-QualityFirefighting Gear Nationwide

Read more less

Recording in 1080p @ 30fps and 720p @60fps High Definition, the Fire Cam 1080 was designed by firefighters to thrive in the unpredictable environment of a working fire. The Fire Cam 1080 is a rock of durability, this fire helmet camera can take on temperatures upwards of 900F for short periods of time and keep on recording. Higher Quality 1080 HD Sensor for a crisp and clear video A wider-angle view Better in low light conditions 20% more battery life than the older model Optional date and Time Stamp option ON the video Other accessories that come with the Fire Cam 1080 are 2 spare rechargeable batteries, a USB cable and charger, a waterproof cap (for underwater to 30ft) and water resistant sound cap (for audio). Included in the box: Fire Cam 1080 HD Firefighter Helmet Camera. ONE OF THE ONLY FIRE HELMET CAMERAS SPECIFICALLY DESIGNED BY FIRE CAM FOR INTERIOR FIREFIGHTING CONDITIONS. The BlackJack BJ004 mount for traditional and modern style fire helmets. Water-resistant cap for audio, used for firefighting so that you can hear everything including radio traffic. Waterproof cap for NO audio used for underwater incidents up to 30ft. USB cable for connecting to computer and charger. AC Wall Charger to charge the fire camera after use. Spare waterproof O’Rings Spare glass lens x2 The FIRE CAM DAMAGE WARRANTY If the components in your Fire Cam 1080 accidentally get damaged in a fire, you are covered for one FREE replacement during the first year. This warranty only applies to customers who purchase directly from Fire Cam unless a distributor of Fire Cam otherwise specifies. We are the only fire-resistant camera manufacturer that offers this type of warranty. **Note: While the Fire Cam 1080 was designed for the interior of working fires, it is not recommended to train burn buildings or flashover buildings where firefighters sustain high heat temperatures for long periods while observing fire behavior. Need a higher definition? Start recording in 4K with our Fire Cam Onyx 4K Helmet Cameras. PLEASE BE ADVISED OF FAKE FIRE HELMET CAMERAS BEING SOLD ELSEWHERE. FIRE CAM 1080, FC3, FIRE CAM MINI HD AND THE FC HD DASH CAM AND THE TERM FIRE HELMET CAM / CAMERA ARE TRADEMARKS OF FIRE CAM. OUR PRODUCTS ARE DESIGNED AND SOLD BY FIREFIGHTERS. WE DO NOT SELL OUR CAMERAS ANYWHERE ELSE BUT THROUGH THIS WEBSITE OR FIRE CAM AUTHORIZED DISTRIBUTORS. IF IT DOESN’T SAY FIRE CAM® ON THE CAMERA, IT IS NOT A FIRE HELMET CAMERA. We Are Proud To Offer Top-QualityFirefighting and EMS Supplies Nationwide

Read more less

The helmet-mounted multi-function flashlight is the most versatile choice for helmet-mounted hands-free lighting. This light outshines the competition with its powerful 360-lumen tightly focused flashlight and a beam distance rating of 218 meters (715 feet). Also includes a lower 180 lumen setting for increased runtime. The 4640 also features a 30-lumen for 30 hours Survival Mode. It will fit on any fire helmet (or side-brim hard hat) regardless of whether it has an up-turned or down-turned brim thanks to the multi-angle mount that allows the user to fine-tune the exact light position and angle for optimal aim. This feature makes it possible to not only avoid goggles, face shields, and other helmet-worn gear but also place the light exactly where it’s needed. Rated IP-X7 rated waterproof and meets the requirement for NFPA-1971-8.6 (2013). Powered by 2 CR123 batteries (included). We Are Proud To Offer Top-Quality Fire Equipment,Firefighting Gear, Emergency Medical Supplies,EMS Equipment and Fire and EMS Supplies Nationwide

Read more less

ZONE 0] INTRINSICALLY SAFE FLASHLIGHT (3 AA) W/MULTI-ANGLE MOUNT This flashlight is cETLus, ATEX Zone 0, IECEx, and INMETRO listed as Intrinsically Safe for use in above and below-ground hazardous locations where explosive gases and dust may be present. This light uses an LED rated at 200 lumens that works with a deep parabolic reflector to create a 143-meter flashlight beam. The tail switch provides momentary or constant-on functionality. Meets the requirements of NFPA-1971-8.6 (2013). It is powered by 3 AA batteries (not included). The mount can be attached to either side of the helmet to provide hands-free illumination. Set the light precisely with the 140-degree adjustment mounts to provide clearance around face shields, goggles, or other helmet-mounted equipment. Helmet not included. Features: cETLus, ATEX, IECEx, and INMETRO-certified Intrinsically Safe for use in both above and below-ground hazardous locations where explosive gases and dust may be present LED technology Momentary or constant-on flashlight Sharp-focused flashlight beam for distance illumination Polymer housing Non-slip grip Tail switch Mount can be attached to either side of the helmet Mount allows for clearance around face shields, goggles or other helmet-mounted equipment Dustproof / Waterproof Impact & chemical resistant Meets Requirements of NFPA-1971-8.6 (2013) 3 AA batteries (not included) Limited Lifetime Warranty Specifications: UPC: 017398806206 High Lumens: 200 High Beam Distance (m): 143 High Candela: 5,129 Drop Rating: 2 m Water Rating: IP-67 Dustproof/Waterproof High Runtime (h): 10.5 Switch Function: Single Body Switch - Momentary or Constant-on Flashlight Light Source: LED Case Material: Engineered Polymer Body Color: IS Green/Black Strap/Mount: Helmet Mount Quantity of Batteries: 3 Power Source: AA Package Contents: Flashlight and multi-angle mount Warranty: Limited Lifetime Warranty Dimensions: Length: 5.6 in (142 mm) Weight: 5.4 oz (143 g) Handle Diameter: 0.75 in x 1.4 in (19 mm x 35 mm) Head Diameter: 1.5 in (38 mm) Certifications: CLASS I DIV 1:GRPS A-D T3 CLASS II & III DIV 1:GRPS E-G T135°C CLASS I ZONE 0:AEx ia IIC T3 Ga ATEX Certification:II 1 G Ex ia op is IIC T3 Ga IECEx Certification:Ex ia op is IIC T3 Ga We Are Proud To Offer Top-QualityEMS Supplies and Firefighter Gear Nationwide

Read more less

The FORTEM helmet-mounted multi-function Dual-Light™ flashlight is the most versatile choice for helmet-mounted hands-free lighting. The powerful 220-lumen outshines the competition with a tightly focused flashlight and a beam distance of 183 meters (600 feet). Choose from two additional lower lumen settings at 100 or 30 lumens to adjust the amount of concentrated light. Located just below the flashlight is the 45-degree angled floodlight to illuminate the ground. Brightness settings for the floodlight give the choice of 100 or 50 lumens for typical use and a Survival Mode at 15 lumens for emergencies. The Dual-Light™ mode (both the flashlight and the floodlight turned on simultaneously) lights up the distance and the ground simultaneously for maximum versatility and safety. The light also has a green, rear-facing LED light so others can quickly identify team personnel in smoke-filled or dusty environments.Fits on any fire helmet (or side-brim hard hat) with an up-turned or down-turned brim. The 360-degree pivoting mount allows precise positioning to avoid goggles, face shields, and other helmet-worn gear. Rated IP-X7 is waterproof and meets the requirement for NFPA-1971-8.6 (2013). Powered by 2 CR123 batteries (included). Not compatible with rechargeable batteries. FEATURES Flashlight – Floodlight – Dual-Light™ LED technology User-selectable brightness on Flashlight & Floodlight including 15 Lumen Survival mode on Floodlight 360-degree pivoting clamp mount fits virtually all fire helmets and hard hats LED technology Flashlight – Floodlight – Dual-Light™ User-selectable brightness on Flashlight & Floodlight including 15 Lumen Survival mode on Floodlight 360-degree pivoting clamp mount fits virtually all fire helmets and hard hats Can be mounted to the brim on either side of most helmets Allows user to select exact angle and position for optimum light alignment and clearance of face shields, goggles or other equipment Rear-facing Green Safety LED Cast from ADC12 aluminum alloy IP-X7 Waterproof Impact & chemical resistant Meets the requirements for NFPA-1971-8.6 (2013) Serialized for personal identification 2 CR123 batteries (included) Limited Lifetime Warranty We Are Proud To Offer Top-Quality Fire Equipment,Firefighting Gear, Emergency Medical Supplies,EMS Equipment and Fire and EMS Supplies Nationwide

Read more less

The DICATA® Intrinsically Safe low-profile Dual-Light™ headlamp is cULus, ATEX Zone 0, and IECEx listed Intrinsically Safe. They are designed to work on fire helmets and hard hats with a flip-up face shield. The unique low-profile shape allows users to work without removing the headlamp when raising or lowering their face shield. It is manufactured from glass-filled nylon polymer and features a multi-position tilt head design. The spotlight and the floodlight use LEDs and an advanced TIR lens to optimize lumen output and beam pattern. Front-mounted dual switches provide easy access to the spotlight for distance illumination, floodlight for close-up illumination, and dual light for maximum lighting, versatility, and user safety. Meets the requirements of NFPA-1971-8.6 (2013). Includes a heavy-duty rubber head strap on a fire helmet or hard hat. It is powered by 3 AA batteries (included). FEATURES cULus, ATEX and IECEx listed Intrinsically Safe LED technology Focused high/low-brightness spotlight beam for distance illumination Unfocused high/low-brightness wide-beam floodlight for close-up illumination Dual-Light™ (spotlight and floodlight on at the same time) for maximum versatility Glass-filled nylon polymer housing (TIR) Total Internal Reflection lens designed to optimize lumen output and beam pattern Dual switches located on the front of the light Adjustable tilt head The battery pack located in the rear of the strap Green colored rear facing LED Heavy-duty rubber strap for fire helmets and hard hat applications IP-67 Dustproof/Waterproof Impact & chemical resistant 3 AA batteries (included) Limited Lifetime Warranty We Are Proud To Offer Top-Quality Fire Equipment,Firefighting Gear, Emergency Medical Supplies,EMS Equipment and Fire and EMS Supplies Nationwide

Read more less

The low-profile Dual-Light™ headlamp is designed specifically to work on fire helmets and hard hats that have a flip-up face shield. The unique low-profile shape allows the user to work without having to remove the headlamp when raising or lowering their face shield. Manufactured from glass-filled nylon polymer and features a multi-position tilt head design. Both the spotlight and the floodlight use LED’s with and an advanced TIR lens designed to optimize lumen output and beam pattern. The spotlight and the floodlight are both rated at 250 lumens in high mode and 125 lumens in low mode. Front-mounted dual switches provide easy access to the spotlight for distance illumination, the floodlight for close-up illumination, and Dual-Light for maximum lighting, versatility, and user safety. Rated IP-X7 rated waterproof. Meets the requirement for NFPA-1971-8.6 (2013). Includes a heavy-duty rubber head strap for use on a fire helmet or hard hat. Powered by 3 AA batteries (included). We Are Proud To Offer Top-Quality Fire Equipment,Firefighting Gear, Emergency Medical Supplies,EMS Equipment and Fire and EMS Supplies Nationwide

Read more less

This 220-lumen Multi-Function Dual-Light Headlamp is cULus listed as Intrinsically Safe. The 5453 headlamp features a multi-position tilt head design and includes a backplate for an elastic head strap with a non-slip lining or the included heavy-duty rubber head strap. For zero band usage, 3M™ Dual Lock™ reclosable fasteners are also included (see instructions for proper installation). The top-mounted switch provides a user-selectable spotlight, floodlight, and our exclusive Dual-Light technology, simultaneously providing both the spotlight and the floodlight. Power comes from 3 AAA batteries (included). FEATURES cULus listed Intrinsically Safe LED technology Focused spotlight beam for distance illumination Engineered polymer housing A single switch located on top of the light Adjustable ratchet tilt head Non-slip elastic head strap Heavy-duty rubber strap for hard hat applications Dustproof / Waterproof Impact & chemical resistant 3 AAA batteries (included) Limited Lifetime Warranty Helmet Not Included We Are Proud To Offer Top-QualityFirefighter Gear Nationwide

Read more less

The unique design of this multi-angle helmet mount fits within a hard hat accessory slot and also attaches directly to the brim of most hard hats and fire helmets. Utilizing a one-hand operational tightening screw, this multi-purpose mount is compatible with either size of a traditional upward or downward-size helmet or a fire helmet. Enjoy both a forward and backward tilt and the side-to-side tilt functionality. Choose between an above or below-brim configuration and tighten only once for a firm, consistent hold. Meets the requirement of NFPA-1971-8.6 (2013). FEATURES Designed to fit Nightstick XPP-5418 and NSP-2420 models The multi-angle design fits most hard hats and fire helmets Includes both adjustable accessory slot mount & brim mount Allows articulation both above and below the brim Helmet and Light Not Included We Are Proud To Offer Top-QualityFirefighter Gear Nationwide

Read more less

The multi-angle helmet mount is a mounting bracket for attaching a flashlight with a 1” handle diameter to the brim of virtually any hire helmet or hard hat. The mount can be attached to either side of the helmet to provide hands-free illumination for the wearer. Additionally, the user can set the angle of the mount through 140 degrees of adjustment to provide clearance around face shields, goggles, or other helmet-mounted equipment. Includes light, mount, set screws (2), 2 – 5/16”-18 X 1/4” Brim Mounting Allen Set Screws (for Fire Helmets), 2 – 5/16”-18 X 3/8” Brim Mounting Allen Set Screws (for Hard Hats) and a 5/16” Allen Wrench. Meets the requirements of NFPA-1971-8.6 (2013).  FEATURES Works with virtually all Fire Helmets and Hard Hats Can be mounted to the brim on either side of most helmets Allows user to determine exact position for optimum light alignment 140 Degrees of angle adjustability to clear face shields, goggles or other equipment Fits any Nightstick TAC Light or any flashlight with a 1” handle diameter Made from 6061-T6 Aluminum Meets the requirements of NFPA-1971-8.6 (2013) Includes Mount, Light Mounting Allen Set Screw, 2 different length Brim Mounting Allen Set Screws, and Allen Wrench We Are Proud To Offer Top-QualityFirefighter Gear Nationwide

Read more less