Structural Firefighting Tools

Designed to hold the Model # D42 or Model # D56 crash axe. Made of durable Synthetic Leather. Can be worn on any belt up to 2" wide. We Are Proud To Offer Top-Quality Firefighting Gear Nationwide

Read more less

The most utilized tool in the fire and rescue service today! Developed by the Forcible Entry Instructor of the N.Y.F.D. this Halligan-type forcible entry tool is the result of years of research and countless interviews with fire chiefs and firefighters in the F.D.N.Y. and many other large and small departments located in the eastern section of the U.S.Features: Available in 24", 30", 36" and 42" lengths 36" and 42" have Celtex Grip A Halligan-type forcible entry tool Available with or without 1 ring. The ring is utilized to attach a sling if desired. Sling not included. 30” is drop forged, one piece construction, of alloy steel 24”, 36” and 42” are comprised of three welded pieces. And most important, the fork, adz and point are designed with the correct lengths, widths and tapers to enable the firefighter to effect easy penetration and maximum leverage   The Pro-Bar is designed for Professionals. We Are Proud To Offer Top-Quality Firefighting Tools Nationwide

Read more less

Fits various Bresnan distributors.Our Bresnan Cage fits over the Bresnan and allows it to spin freely.  The cage can be used for highrise, into a cellar, or next to a vehicle to prevent exposure. (EV or traditional cars).Designed for both 2 1/2" and 1 3/4" couplings.  One side fits 2 1/2" and the other fits 1 3/4" *Bresnan Distributor Not Included*Bresnan is now all red and welded and slightly different than the photo We Are Proud To Offer Top-QualityFirefighting Supplies Nationwide

Read more less

Store your Z Hook Tools safely with Ziamatic’s new SURE-GRIP Z Hook Tool Mounting Kits. These new mounting kits provide firefighters with a Z Hook Tool and the bracket and mount they can use to store it safely. Choose from our different models that mount two different lengths of Z Hook Tools with D handles. The options include a 6-foot Z Hook Tool with a left or right mounting solution or an 8-foot Z Hook Tool with left or right mounting solutions. The mounting solutions utilize Ziamatic’s SURE-GRIP Hook Tool Mounting Brackets to safely store Ziamatic’s Z hook tools and many other NY hook style tools. They were designed using stainless steel to complement all truck body styles and looks while maintaining a strong attractive finish. The mounting kit also includes the SURE-GRIP tool mount (model SG-VM-1) which provides one of the strongest ways to retain tools with a quick and simple release and retrieval process. The rubber pads on both the strap and on the body of the SURE-GRIP bracket are proven to eliminate vertical movement when the vehicle is in transit virtually. The mounting solutions fit all-length hook poles by adjusting the distance between the top bracket and the SURE-GRIP bracket. A left and right option is available to satisfy almost all mounting application needs. To release a tool, simply release the hook and loop strap and lift the tool up and out of the bracket. **INCLUDES A 6' OR 8' Z HOOK TOOL AVAILABLE MODELS: SG-VM-ZHR-6 – includes Hook Tool Mounting Bracket – Right (SG-VM-ZHR) and 72″ Long Z Hook Tool with “D” Handle (Model ZH-72-D) SG-VM-ZHR-8 – includes Hook Tool Mounting Bracket – Right (SG-VM-ZHR) and 96″ Long Z Hook Tool with “D” Handle (Model ZH-96-D) SG-VM-ZHL-6 – includes Hook Tool Mounting Bracket – Left (SG-VM-ZHL) and 72″ Long Z Hook Tool with “D” Handle (Model ZH-72-D) SG-VM-ZHL-8– includes Hook Tool Mounting Bracket – Left (SG-VM-ZHL) and 96″ Long Z Hook Tool with “D” Handle (Model ZH-96-D) We Are Proud To Offer Top-QualityFirefighter Equipment Nationwide

Read more less

Roof Hook, NY Style (Marrying Slot) with Pry End By patterning after traditional fire tools, studying popular modifications, and using feedback from seasoned Firefighters, we have taken the NY-style Roof-Hook to a new level. The Roof-Hook has many standard design elements, which include: ~ Drop-forged high-carbon steel hook-head and chisel-end. ~ 1 inch diameter DOM (Drawn Over Mandrel) steel tubing for strength and reduced weight. ~ No rubber or foam grips, so it can be used out of the box as is or customized by the end user/firefighter. Major improvements include: ~ A slot forged into the lower hook, to allow the forks of a traditional Halligan to be married. ~ The end of the upper hook comes to a point so that it can be used to break tempered window-glass/auto-glass or pierce roof decking to add safety and foot support during roof work. ~ The chisel end and 1” diameter tubing will slide inside the rung of a standard fire ladder, allowing for additional safety and support while during roof work, or allow gear/equipment to be hung off the side of a ladder to keep it safe and off the ground. ~Made in the USA! We Are Proud To Offer Top-Quality Firefighting Tools Nationwide

Read more less

6′ Tamper Bar made from 1″ Round steel featuring a bell grip with a flat back to ride along the surface of a vertical post and a wide blade end.  It is often used to tamp down and compact the soil or fill around a set post in the ground to stabilize it.  Other uses include construction/demolition, landscaping, Post-hole/fence building and cutting roots/saplings or briars. The overall length is six ′ Made of 1″ round steel Painted with Black finish to deter rust Bell grip with a flat back & 2.3″ Blade end 17# weight Made in USA. We Are Proud To Offer Top-Quality Firefighting Tools Nationwide

Read more less

4′ Tamper Bar made from 1″ Round steel featuring a bell grip with a flat back, to ride along the surface of a vertical post and a wide blade end. It is often used to tamp down and compact the soil or fill around a set post in the ground to stabilize it.  Other uses include construction/demolition, landscaping, Post-hole/fence building and cutting roots/saplings or briars. The overall length is four ′ Made of 1″ round steel Painted with a Black finish to deter rust Bell grip with a flat back & 2.3″ Blade end 12# weight Made in USA. We Are Proud To Offer Top-Quality Firefighting Tools Nationwide

Read more less

The Council version of the IRONS features our TD30 (Tuned and Dressed) Halligan tool married with our FE8 (Forcible Entry 8# Flathead axe). A marriage made in heaven!!  This Council version of the IRONS features our TD30 (Tuned and Dressed) Halligan tool married with our FE8 (Forcible Entry 8# Flathead axe).  TD30 is forged from 4140 in one piece and designed for maximum forcible entry.  The slot in the FE8 head allows both to be carried together without strapping. FE8 features our Patent Pending Dual-Grip 32″ hickory handle. Features a palm swell on one side and a fawn’s foot on the other.   This handle is designed to be comfortable in the hand either way you are swinging the axe. Tap the head down to set the bond and tap the handle down to release. The working ends are heat-treated for maximum strength, toughness, and wear resistance. The fork, adz, and pike are designed for leverage and strength. Widths and tapers are intended to allow easy penetration. Halligan comes “Tuned and Dressed,” meaning the forks are thinned out, and gap and set marks are already on both ends of the tool. The overall length is 30 in. Made of .987″ Octagon 4140 steel. Lacquer finish to show natural steel (no welds) for an easy-to-maintain finish and to deter rust. Made in USA. Download our Council Fire FLYER TD30 Prop 65 Warning: This product contains Nickel (metallic), a chemical known to the State of California to cause cancer. For more information, go to www.p65warnings.ca.gov. We Are Proud To Offer Top-Quality Firefighting Tools Nationwide

Read more less