All

Call for Quote-Minimum Order 4 6.0 lbs. Pickhead fireman’s axe with a 32 in. curved hickory handle. Traditional pick head style. Cutting bit on one end and a pick designed to penetrate on the other. Used in all municipal fire fighting applications, chopping, battering, forcible entry, door stop, ect. The cutting edge is approximately 5″ in. overall length. Forged tool steel head. Made in the USA. Body fully polished, hand sharpened, tapered cutting edge and pick. ANSI Standards call for a bit hardness of Rc 45-60, at least ½ inches back from the cutting edge. Council Tool internal standards call for tempered bit hardness of Rc 48-55, and we target 1-1/4 inches from the cutting edge. The poll and eye walls are not hardened and remain in the as-forged condition. The body is coated with fire engine red enamel and the cutting edges in clear lacquer to deter rust. 32 in American hickory handle. The eye section is dried to below 10% moisture content to minimize shrinkage and help prevent loosening. The axe head is hydraulically seated onto the handle and secured with a serrated aluminum wedge. The serrated shape improves bite and the aluminum choice of material is strong, lightweight and does not change size with moisture content. The interior detail of the eye is tapered and allows for a strong mechanical bond. Approximately 1/2 in. of the handle's overall length is removed during assembly. Prop 65 Warning: This product contains Nickel (metallic), a chemical known to the State of California to cause cancer. For more information, go to www.p65warnings.ca.gov. We Are Proud To Offer Top-Quality Firefighting Tools Nationwide

Read more less

Call for Quote-Minimum Order 4 6.0 lbs. Flathead fireman’s style single bit axe with a 36 in. fiberglass handle. Dayton patterned head. Used in all manner of municipal fire fighting applications, chopping, battering, forcible entry, door stop, ect. Cutting edge is approximately 5″ in. overall length and the poll is square. Forged tool steel head. Made in USA. Body fully polished, hand sharpened, tapered bit for cutting Heat-treated cutting edge produces fine grain structure and RC 45-55 (Rockwell Hardness Value) for safety, edge holding and toughness. The body is coated with fire engine red enamel and the cutting edge in clear lacquer to deter rust. 36 in yellow clad style fiberglass handle. Traditional single bit shape. Construction is a pultruded structural fiberglass core with an injection molded jacket acting as an exterior body. The jacket is tough, durable engineered polymer. Extremely strong, non-conductive and non-corrosive. Axe head is joined to the handle with a strong resilient epoxy, forming a chemical and mechanical bond. The interior detail of the eye is tapered and allows for a strong mechanical bond. Prop 65 Warning: This product contains Nickel (metallic), a chemical known to the State of California to cause cancer. For more information, go to www.p65warnings.ca.gov. We Are Proud To Offer Top-Quality Firefighting Tools Nationwide

Read more less

Call for Quote-Minimum Order 4 6.0 lbs. Flathead fireman’s style single bit axe with a 32 in. curved handle. Dayton patterned head. Used in all manner of municipal fire fighting applications, chopping, battering, door stop, ect. Cutting edge is approximately 5″ in. overall length and the poll is square. Forged tool steel head. Made in USA. Body fully polished, hand sharpened, tapered bit for cutting. ANSI Standards call for bit hardness of Rc 45-60, at least ½ inch back from the cutting edge. Council Tool internal standards call for tempered bit hardness of Rc 48-55 and we target 1-1/4 inches from the cutting edge. The poll and eye walls are not hardened and remain in the as forged condition. Body coated with fire engine red enamel and the cutting edges in clear lacquer to deter rust. 32 in. curved hickory handle. Eye section is dried to below 10% moisture content to minimize shrinkage and help prevent loosening. Axe head is hydraulically seated onto handle and secured with a serrated aluminum wedge. The serrated shape improves bite and the aluminum choice of material is strong, lightweight and does not change size with moisture content. The interior detail of the eye is tapered and allows for a strong mechanical bond. Approximately 1/2 in. of the overall length of the handle is removed during assembly. Prop 65 Warning: This product contains Nickel (metallic), a chemical known to the State of California to cause cancer. For more information, go to www.p65warnings.ca.gov. We Are Proud To Offer Top-Quality Firefighting Tools Nationwide

Read more less

Call for Quote-Minimum Order 4 6.0 lbs. Forcible Entry Flathead fireman’s style single-bit axe with a 34.5″ Fiberglass handle.  Design elements improve performance and usability while helping to reduce fatigue and injury.  Used in all municipal firefighting applications, chopping, battering, door stop, ect. The cutting edge is approximately 5″ in. overall length and the poll is square. This axe will easily pull its weight on the fire ground and will be an invaluable tool for trainers and student firefighters. Forged 4140 steelhead to match Council Halligan. Made in the USA. Forged in slot to marry most popular Halligan tools to create “The Irons”. A tapered wedge-shaped blade allows it to be used a starter wedge and helps capture progress while forcing a door. Extended poll helps to counterbalance the head so that the center of gravity is within the eye/handle. Balanced to lay flat in an open hand so no blade drop or flutter when swinging sideways. The top of the head is flat to stand on its own. Hand-sharpened, tapered bit for cutting. ANSI Standards call for bit hardness of Rc 45-60, at least ½ inch back from the cutting edge. Council Tool internal standards call for tempered bit hardness of Rc 48-55 and we target 1-1/4  inches from the cutting edge. The poll and eye walls are not hardened and remain in the as forged condition. The interior detail of the eye is tapered and allows for a strong mechanical bond. 34 1/2 in. yellow clad style fiberglass handle. Construction is a pultruded structural fiberglass core with an injection molded jacket acting as an exterior body. The jacket is tough, durable engineered polymer. Extremely strong, non-conductive and non-corrosive. Download our Flyer Here Prop 65 Warning: This product contains Nickel (metallic), a chemical known to the State of California to cause cancer. For more information, go to www.p65warnings.ca.gov. We Are Proud To Offer Top-Quality Firefighting Tools Nationwide

Read more less

Call for Quote-Minimum Order 4 6.0 lbs. Forcible Entry Flathead fireman’s style single-bit axe with a 36 in. curved American hickory handle.  Design elements improve performance and usability while helping to reduce fatigue and injury.  Used in all municipal firefighting applications, chopping, battering, door stop, ect. The cutting edge is approximately 5″ in. overall length and the poll is square. This axe will easily pull its weight on the fire ground and will be an invaluable tool for trainers and student firefighters. Forged 4140 steelhead to match Council Halligan. Made in the USA. Forged in slot to marry most popular Halligan tools to create “The Irons”. A tapered wedge-shaped blade allows it to be used a starter wedge and helps capture progress while forcing a door. Extended poll helps to counterbalance the head so that the center of gravity is within the eye/handle. Balanced to lay flat in an open hand so no blade drop or flutter when swinging sideways. Top of head is flat to stand on its own. Hand-sharpened, tapered bit for cutting. ANSI Standards call for bit hardness of Rc 45-60, at least ½ inch back from the cutting edge. Council Tool internal standards call for tempered bit hardness of Rc 48-55 and we target 1-1/4  inches from the cutting edge. The poll and eye walls are not hardened and remain in the as forged condition. 36″ curved hickory handle. Eye section is dried to below 10% moisture content to minimize shrinkage and help prevent loosening. Axe head is hydraulically seated onto handle and secured with a traditional wooden and steel wedge. The interior detail of the eye is tapered and allows for a strong mechanical bond. Approximately 1/2″ of the overall length of the handle is removed during assembly. Download our Flyer Here Prop 65 Warning: This product contains Nickel (metallic), a chemical known to the State of California to cause cancer. For more information, go to www.p65warnings.ca.gov. We Are Proud To Offer Top-Quality Firefighting Tools Nationwide

Read more less

Cal for Quote-Minimum Order 4 6.0 lbs. Forcible Entry Flathead fireman’s style single-bit axe with a 32 in. curved American hickory handle.  Design elements improve performance and usability while helping to reduce fatigue and injury.  Used in all municipal firefighting applications, chopping, battering, door stop, ect. The cutting edge is approximately 5″ in. overall length, and the poll is square. This axe will easily pull its weight on the fire ground and will be an invaluable tool for trainers and student firefighters. Forged 4140 steel heads to match Council Halligan. Made in USA. Forged in slot to marry most popular Halligan tools to create “The Irons”. The tapered wedge-shaped blade allows it to be used as a starter wedge and helps capture progress while forcing a door. The extended poll helps to counterbalance the head so that the center of gravity is within the eye/handle. It is balanced to lay flat in an open hand so that the blade does not drop or flutter when swinging sideways. The top of the head is flat to stand on its own. Hand-sharpened, tapered bit for cutting. ANSI Standards call for bit hardness of Rc 45-60, at least ½ inches back from the cutting edge. Council Tool internal standards call for tempered bit hardness of Rc 48-55, and we target 1-1/4 inches from the cutting edge. The poll and eye walls are not hardened and remain in the as-forged condition. 32″ curved hickory handle. The eye section is dried to below 10% moisture content to minimize shrinkage and help prevent loosening. The axe head is hydraulically seated onto the handle and secured with a traditional wooden and steel wedge. The interior detail of the eye is tapered and allows for a strong mechanical bond. Approximately 1/2″ of the overall length of the handle is removed during assembly. Download our Flyer Here Prop 65 Warning: This product contains Nickel (metallic), a chemical known to the State of California to cause cancer. For more information, go to www.p65warnings.ca.gov. We Are Proud To Offer Top-Quality Firefighting Tools Nationwide

Read more less

Call for Quote-Minimum Order 2 See it in action here! The Council version of the TD30 Halligan tool is growing in popularity and designed in collaboration with top forcible entry trainers. TD30- Tuned and Dressed  Halligan is ready to go.  Forks thinned out, Gap and Set marks in place.  This forcible entry tool is drop forged in one piece from 4140 alloy steel.  Working ends are heat treated for maximum strength, toughness and wear resistance.  The fork, pike and pry are designed for leverage and strength.  Widths and tapers are intended to allow easy penetration. The overall length is 30 in Made of .987″ Octagon 4140 steel Clear Lacquer finish to deter rust 2” Wide offset Adze w/ 30” radial arc and reference line Squared off shoulders for flat, striking surface The gap between the fork ends for pulling the “key-in-knob” Flat side target for striker/axe Made in USA. See it in action here! Download our Council Fire FLYER TD30 Prop 65 Warning: This product contains Nickel (metallic), a chemical known to the State of California to cause cancer. For more information, go to www.p65warnings.ca.gov. We Are Proud To Offer Top-Quality Firefighting Tools Nationwide

Read more less