All

Fingertip Pulse Oximeter A portable fingertip pulse oximeter is ideally suited for home, sport, or aviation use. The 2200 features: Reads SPO2 and Pulse Rate Accuracy: SPO2 ±2% / HR ±5 BPM 2 changeable display modes Bright red LED display Fits fingers with a thickness of 8mm-20mm (0.31"-0.79") Carry Lanyard 2 “AAA” Batteries Instruction Booklet 1-year limited warranty We Are Proud To Offer Top-QualityEMS Equipment Nationwide

Read more less

Our newest pediatric fingertip pulse oximeter with a fresh face! The Adimals® 2150 features: Reads SpO2 and Pulse Rate Accuracy: SpO2 ±3% / HR ±2 BPM Six changeable display modes 10 display brightness settings Child-friendly instrument face Fits fingers with a thickness of 0.3” to 0.44” (7.64mm to 11.19mm) Carry lanyard Soft carry case Two “AAA” batteries Instruction booklet Two-year limited warranty Meets or exceeds ISO 9919 We Are Proud To Offer Top-QualityEMS Equipment Nationwide

Read more less

Fingertip Pulse Oximeter A portable, feature-rich pulse oximeter that provides spot readings of SpO2 and heart rate for the busy healthcare professional. The 2100 features: Reads SpO2 and Pulse Rate Accuracy: SpO2 ±2-3% / HR ±5 BPM 6 changeable display modes 10 Display brightness settings 25% smaller than competing models Fits fingers with a thickness of .31” to .79” (8mm to 20mm) Dual-color OLED display The hinged battery cover is more secure Complete with Carry Lanyard and Black Rubberized Bumper. (Optional orange bumper sold separately) 2 “AAA” Batteries Instruction Booklet 2-year limited warranty Meets or exceeds ISO 9919 We Are Proud To Offer Top-QualityEMS Equipment Nationwide

Read more less

Finger Ring Cutter features: Chrome handle Safety lever slides protective plate between finger and ring A large thumbscrew operates a razor-sharp serrated saw We Are Proud To Offer Top-QualityEMS Equipment Nationwide

Read more less

Diamonds are attached using a vacuum brazing process. Blade core features silicone carbide electroplating to reduce binding. Ductile iron Cast iron Concrete pipe Reinforced concrete* *Will cause excessive blade wear Diamond blades are not intended to cut aluminum. Aluminum adheres to the diamond segments reducing cutting performance. If the blade cuts aluminum, the diamonds can be cleaned by performing a plunge cut into an abrasive material. Using a water kit when cutting aluminum can improve performance.

Read more less

Diamonds are attached using a laser welding process. General purpose concrete cutting Concrete pipe Concrete walls Diamond blades are not intended to cut aluminum. Aluminum adheres to the diamond segments reducing cutting performance. If the blade cuts aluminum, the diamonds can be cleaned by performing a plunge cut into an abrasive material. Using a water kit when cutting aluminum can improve performance.

Read more less

Diamonds are attached using a vacuum brazing process. Vacuum brazing is stronger under conditions of extreme heat. Ideal for cutting: Rescue and demolition Iron pipe and security bars Steel doors and locks Vehicle bodies Not suitable for wood NOTE ON CUTTING ALUMINUM:Diamond blades are not intended to cut aluminum. Aluminum adheres to the diamond segments reducing cutting performance. If the blade cuts aluminum, the diamonds can be cleaned by performing a plunge cut into an abrasive material. Using a water kit when cutting aluminum can improve performance.

Read more less

The Ventmaster® K1 PACE Fire Rescue Cutoff Saw is a high-power battery cutter with the power and performance you expect from equivalent gas-powered cutters. Ergonomic and user-friendly with low vibrations, optimally balanced machine and zero direct emissions. Powered by Husqvarna PACE battery system with high power and fast charging for impressive productivity and a well-suited match with our specially designed battery blade range for maximized cutting depth and optimized performance. A POWERFUL BATTERY-DRIVEN FIRE RESCUE SAW Power and performance in par with equivalent gas-powered cutters. With an integrated gearbox for higher torque. For high productivity. LIGHT AND PERFECTLY BALANCED The centered placement of the blade provides increased stability and control. The lighter weight and reduced vibration create a much smoother cutting experience for the operator, reducing strain. HIGH-POWER PACE BATTERY SYSTEM Enables quick charging, high power and performance which maximizes your efficiency and productivity. BATTERY RUN TIME A single, full battery charge is comparable to a tank of fuel on a gas saw. X-HALT™ BLADE BRAKE Stops a spinning blade in a fraction of a second for enhanced safety PATENTED, TOOL-LESS “KIS-360” DEPTH GAUGE Available only from Tempest, the patented KIS-360 depth gauge allows for precise control of cutting depth. KIS-360 Depth Gauge Kit includes templates and hardware to mount depth gauges on most manufacturers’ cutoff saws. BOTTOM ROLLER ASSEMBLY This feature provides a resting place for the saw during long cuts to give the user better balance and control. The Bottom Roller Assembly reduces operator fatigue, especially when combined with KIS-360 Depth Gauge. HIGH-SPEED CUTTING High-speed revolutions at 11640 ft/ minute (3548 m/ minute) for fast, smooth cutting

Read more less

Features a Tempest exclusive belt-drive design which reduces engine wear, improves CFM performance and provides greater stability. The Tempest Belt-Drive Power BlowerTM is the original PPV fan and still the gold standard today. Offers industry-leading reliability, durability and performance. Uniquely designed impellers deliver maximum air volume (CFM), velocity, and pressure from each Tempest Power Blower™. Every size and type of fan features a blade designed specifically for it to deliver the greatest performance possible. Composite blades are much safer than traditional metal blades as they are designed to disintegrate upon the impact of any foreign objects. Metal blades may fragment when integrity is compromised, potentially causing severe injury. Every bend and cross brace weld is structurally engineered to increase the blower frame’s strength-to-weight ratio by as much as 30%. Welds eliminate the need to continuously maintain/tighten nuts and bolts. Its roll cage design gives protection to all angles and sides of the shroud and motor. The exclusive frame design makes it convenient to lift, carry, and transport. Numerous points on the frame double as lifting/carrying handles. The design itself is the result of three decades of testing, research, and experience to create the most ergonomic platform possible. No levers to set or knobs to tighten when setting the angle for PPV/PPA. Foot-operated adjustment is quick, easy, and secure. Allows for up to 5 (4 on 16” models) tilt positions: -5°, 0°, +5°, +10°, +15° The Tempest Belt-Drive positive pressure ventilation fans were designed with two major goals in mind. The first was to keep the engine at the lowest center of gravity as possible. Doing so greatly reduces the amount of vibration produced by the fan and guarantees it will not “walk”. Secondly, the belt/pulley system allows Tempest engineers to maximize the RPM’s at the blade, optimizing CFM output. The Belt-Drive has been categorized as the “Cadillac” of PPV fans. Gasoline-powered fans offer the highest CFM performance available. Ranging anywhere from 4.8 to 8.5 HP, these positive pressure ventilation fans are recommended for the implementation of a Positive Pressure Attack (PPA) in residential structures. Extra-wide 8″ off-road non-pneumatic tires are more durable and allow easy movement up and down stairs, over curbs, and large diameter hoses, as well as through rough or muddy terrain. No brakes to forget to lock down or unlock. The positive pressure ventilation fan rests on firm, anti-vibration rubber feet for stability. “Walking” or movement of the blower while in operation is eliminated. The risk of getting clothing in PPV fan blades while kneeling to set brake levers is eliminated. By redesigning the inward curve and front of the shroud, the Turbo 2000 increases air velocity by up to 30%. The air hitting the ventilation opening is stronger and maintains PPV pressure farther downwind. No levers to set or knobs to tighten when setting the angle for PPV. Foot-operated adjustment is quick, easy, and secure. The dual step allows for adjustment with either foot. Four back and one forward tilt position. Front and rear safety grilles feature a continuous spun wire body with eight tie-point bars that also support the “Turbo 2000” shroud integrity. Meets strict European CE Safety Standards. Features a large section of durable, reflective material to dramatically increase the visibility of the blower from the front view and a full list of instructions on the back to allow for safe and effective use. We Are Proud To Offer Top-QualityFirefighting and EMS Supplies Nationwide

Read more less

Special Operations Power BlowersTM are the perfect choice for departments who often ventilate large, complex and/or multi-story structures (>5005.21 sq.ft.) and stairwells. Allows for distanced set-back over 9.84 ft. but requires at least 6.88 ft. to achieve positive pressure ventilation. Available in gas (Honda® GX engine) or electric (GFCI compatible, variable speed) driven models. The Special Operations (SP) Power Blower™ uses a uniquely designed grill and shroud to produce a narrow, high pressure air pattern called Laminar Air Flow. Fires in large, complex structures as well as multi-level structures build high back pressures inside the building. This high pressure air pattern is capable of overcoming these back pressures resulting in uninhibited ventilation. This allows for a distanced set-back reducing fan noise heard inside the structure. Uniquely designed impellers deliver maximum air volume (CFM), velocity and pressure from each Tempest Power Blower™. Every size and type of fan features a blade designed specifically for it to deliver the greatest performance possible. Composite blades are much safer than traditional metal blades as they are designed to disintegrate upon impact of any foreign objects. Metal blades may fragment when integrity is compromised, potentially causing severe injury. Every bend and cross brace weld is structurally engineered to increase the blower frame’s strength to weight ratio by as much as 30%. Welds eliminate the need to continuously maintain/tighten nuts and bolts. Its roll cage design gives protection to all angles and sides of the shroud and motor. No levers to set or knobs to tighten when setting the angle for PPV/PPA. Foot operated adjustment is quick, easy and secure. Allows for up to 5 (4 on 16” models) tilt positions: -5°, 0°, +5°, +10°, +15°. The SP positive pressure ventilation fans are powered by the tried and true Honda® name. Using two of their most reliable small engines, the GX200 and GX270, paired with Tempest’s signature quality fan designs, these units are built to last. At 5.5 and 8.5 HP, the GX series motors are also equipped to deliver the performance and CFM you’d expect from the Tempest name. Cone Air Flow fan placement has always been 1.2 to 1.8 m from the doorway. The SP fan is most effective at a set-back of 8.86 to 10.8 m using Laminar Air Flow, allowing improved personnel access. The new shroud and grille design makes high performance at this distance possible. SP units require at least a 6.9 m set back to achieve effective positive pressure ventilation. The exclusive full width handle design makes pushing or pulling a positive pressure ventilation fan to and from the ventilation site quick and easy. The handle quickly swings up to a comfortable height and automatically locks firmly into position. Unlatch and easily fold the handle down for storage at the PPV fan’s listed dimensions. No levers to set or knobs to tighten when setting the angle for PPV/PPA. Foot operated adjustment is quick, easy and secure. Allows for up to 6 tilt positions: -10°, -5°, 0°, +5°, +10°, +15°. The rear wheel design improves the PPV fan balance while it is rolling, keeping the shroud from touching the ground and making deployment easy across snow, heavy mud or rough, uneven terrain. This design also allows for rapid blower direction adjustment saving time and improving safety. Tempest blowers have no need for wheel brakes. This in turn removes the chance for forgetting to set/release the brakes. Features a large section of durable, reflective material to dramatically increase visibility of the blower from front view and a full list of instructions on the back to allow for safe and effective use. We Are Proud To Offer Top-QualityFirefighting and EMS Supplies Nationwide

Read more less

The VSR is the latest innovation in our variable speed electric offering and delivers unmatched performance, bridging the gap between gas and electric airflow. All models feature a class leading 2.0 HP motor and simple to operate 0 to 100 variable speed control. NEMA-4 rated drive provides extra protection in wet environments. This fan will operate on GFCI protected circuits. Motors can be ordered in 110-120V/60Hz or 220-230V/50Hz. (110-120V part numbers shown; call for 220-230V part numbers). Uniquely designed impellers deliver maximum air volume (CFM), velocity and pressure from each Tempest Power Blower™. Every size and type of fan features a blade designed specifically for it to deliver the greatest performance possible. Composite blades are much safer than traditional metal blades as they are designed to disintegrate upon impact of any foreign objects. Metal blades may fragment when integrity is compromised, potentially causing severe injury. Every bend and cross brace weld is structurally engineered to increase the blower frame’s strength to weight ratio by as much as 30%. Welds eliminate the need to continuously maintain/tighten nuts and bolts. Its roll cage design gives protection to all angles and sides of the shroud and motor. Exclusive frame design makes it convenient to lift, carry and transport. Numerous points on the frame double as lifting/carrying handles. The design itself is the result of three decades of testing, research and experience to create the most ergonomic platform possible. No levers to set or knobs to tighten when setting the angle for PPV/PPA. Foot operated adjustment is quick, easy and secure. Allows for up to 5 (4 on 16” models) tilt positions: -5°, 0°, +5°, +10°, +15°. The VSR positive pressure ventilation fan bears our latest variable speed drive. This GFCI compatible, NEMA 4 rated control box is durable, reliable and easy to operate. The 0 – 100 Rheostat knob and On/Off toggle are all it takes to operate the unit quickly and effectively. You don’t always have to sacrifice performance for the convenience of an electric powered positive pressure ventilation fan. Our latest Power BlowerTM, the VSR, is closing the CFM gap between gas and electric. Equipped with a massive 2.0 HP motor, paired with our signature blade and shroud design, the VSR delivers the absolute best in GFCI compatible performance. If you’re looking to go electric but don’t want to sacrifice airflow, the VSR PPV fan is the answer. Extra wide 8″ off-road non-pneumatic tires are more durable and allow easy movement up and down stairs, over curbs and large diameter hoses, as well as through rough or muddy terrain. No brakes to forget to lock down or unlock. The PPV fan rests on firm, anti-vibration rubber feet for stability. “Walking” or movement of the fan while in operation is eliminated. Risk of getting clothing in the positive pressure fan’s blades while kneeling to set brake levers is eliminated. 16″ models are only available with 6″ non-pneumatic tires. By redesigning the inward curve and front of the shroud, the Turbo 2000 increases air velocity by up to 30%. The air hitting the ventilation opening is stronger and maintains PPV pressure farther downwind. The exclusive full width handle design makes pushing or pulling the positive pressure ventilation fan to and from the ventilation site quick and easy. The handle quickly swings up to a comfortable height and automatically locks firmly into position. Unlatch and easily fold the handle down for storage at the PPV fan’s listed dimensions. No levers to set or knobs to tighten when setting the angle for PPV. Foot operated adjustment is quick, easy and secure. Dual step allows for adjustment with either foot. Four back and one forward tilt position. Front and rear safety grilles feature a continuous spun wire body with eight tie point bars that also support the “Turbo 2000” shroud integrity. Meets strict European CE Safety Standards. Features a large section of durable, reflective material to dramatically increase visibility of the blower from front view and a full list of instructions on the back to allow for safe and effective use. We Are Proud To Offer Top-QualityFirefighting and EMS Supplies Nationwide

Read more less

Special Operations Power BlowersTM are the perfect choice for departments who often ventilate large, complex and/or multi-story structures (>464 sq. m.) and stairwells. Allows for distanced set-back over 3 m. but requires at least 2.1 m to achieve positive pressure ventilation. Available in gas (Honda® GX engine) or electric (GFCI compatible, variable speed) driven models. The Special Operations (SP) Power Blower™ uses a uniquely designed grill and shroud to produce a narrow, high-pressure air pattern called Laminar Air Flow. Fires in large, complex structures as well as multi-level structures build high back pressures inside the building. This high-pressure air pattern is capable of overcoming these back pressures resulting in uninhibited ventilation. This allows for a distanced set-back reducing fan noise heard inside the structure. Uniquely designed impellers deliver maximum air volume (CFM), velocity, and pressure from each Tempest Power Blower™ . Every size and type of fan features a blade designed specifically for it to deliver the greatest performance possible. Composite blades are much safer than traditional metal blades as they are designed to disintegrate upon the impact of any foreign objects. Metal blades may fragment when integrity is compromised, potentially causing severe injury. Every bend and cross brace weld is structurally engineered to increase the blower frame’s strength to weight ratio by as much as 30%. Welds eliminate the need to continuously maintain/tighten nuts and bolts. Its roll cage design gives protection to all angles and sides of the shroud and motor. No levers to set or knobs to tighten when setting the angle for PPV/PPA. Foot-operated adjustment is quick, easy, and secure. Allows for up to 6 tilt positions: -10°, -5°, 0°, +5°, +10°, +15°. The SPVS bears our latest variable speed drive. This GFCI compatible, NEMA 4 rated control box is durable, reliable, and easy to operate. The 0 – 100 rheostat knob and On/Off toggle is all it takes to operate the unit quickly and effectively. Equipped with a massive 2.0 HP motor and paired with its signature blade and shroud design, the SPVS positive pressure ventilation fan delivers the absolute best in GFCI compatible performance. Cone Air Flow fan placement has always been 1.2 to 1.8 m from the doorway. The SP fan is most effective at a setback of 2.7 to 3.3 m using Laminar Air Flow, allowing improved personnel access. The new shroud and grille design allow high performance at this distance possible. SP units require at least a 7-foot set back to achieve effective positive pressure ventilation. The exclusive full-width handle design makes pushing or pulling the positive pressure ventilation fan too and from the ventilation site quick and easy. The handle quickly swings up to a comfortable height and automatically locks firmly into position. Unlatch and easily fold the handle down for storage at the PPV fan’s listed dimensions. No levers to set or knobs to tighten when setting the angle for PPV/PPA. Foot-operated adjustment is quick, easy, and secure. Allows for up to 6 tilt positions: -10°, -5°, 0°, +5°, +10°, +15°. The rear wheel design improves the positive pressure ventilation fan balance while it is rolling, keeping the shroud from touching the ground and making deployment easy across the snow, heavy mud, or rough, uneven terrain. This design also allows for rapid blower direction adjustment saving time and improving safety. Tempest blowers have no need for wheel brakes. This in turn removes the chance for forgetting to set/release the brakes. The Information/Safety Bar added to the folding handle features a large section of durable, reflective material to dramatically increase the visibility of the PPV fan from the front view and a full list of instructions to allow for safe and effective use. We Are Proud To Offer Top-QualityFirefighting and EMS Supplies Nationwide

Read more less